| Author | Message | ||
     Wernerjb Tinkerer Username: Wernerjb Post Number: 188 Registered: 07-2006 Rating: N/A |
Mike rgb, the article is about how to properly adjust the lens, to get the aperture module out I asked Henry for more pictures, unfortunately I do not have them any longer due to a computer failure. One has to go in from the front and (as the pic in the article shows) one has to remove the rubber, so that the lens can be taken apart. IIRC the front lens cell can be unscrewed after just loosening some tiny setscrews. Next thing is the removal of another lens element under which the aperture housing sits. Before you start you should perhaps ask Henry for that sequence of pictures first, W. Aperture and shutter blades usually do not need any sort of oil but be absolutely clean instead. |