| Author | Message | ||
     L_n_h Tinkerer Username: L_n_h Post Number: 20 Registered: 09-2007 Rating: N/A |
OK, will check that out. The double-sided 'tape' in my drawer turned out to be d.s.-mounting tape, which is a bit like foam draught-excluder. It looked far too thick to stick the plastic backing onto the camera body as it would stick out too much; but it may be ideal for sealing the hinge area (after one sticky side has been cut off). Im also half-expecting the big round hole in the front plate (where the self-timer lever would have been fitted on) to pose a problem; but it will only be so if the plastic backing isnt fixed down around it 100% good. However, these are things which can only really be 'trial and errored'... Thanks for the tip! |