| Author | Message | ||
     Dgillette4 Tinkerer Username: Dgillette4 Post Number: 88 Registered: 04-2007 Rating: N/A |
To remove the top cover,first remove 3 perimeter screws, there is one hidden behind the red dot on the front by the lense mount, I use acetone and then unscrew it. Next set asa to 100 and 100 shutter speed. remove the screw on the top dial being careful the is a spring underneath. You will have to remove the collar around the release button I have used a rubber jar top gripper , remove it counter clockwise. keep all the parts in order when you do this . Then pop open the back and put something in dthe film rewind fork so as not to let it tdurn. Then just turn the rewind know counterclockwise to remove. Under neath this on top is a split nut that has to be removed once the shaft is slid out. it too is ccw to remove. Now the top will lift up and off. remember to leave the back open. If the back gets snapped shut while woriking on the camera you can access the release from the bottom with the bottom cover off...Go slow there are many strings..Doin |