Spdtwn
Tinkerer Username: Spdtwn
Post Number: 20 Registered: 09-2007
Rating: N/A Votes: 0 | Posted on Tuesday, November 06, 2007 - 06:51 pm: | |
If you have had a look at the manual, you will see that to adjust the clearance the wind side leather cover has to be removed to access a little cover plate along the bottom of the body. There is an eccentric adjustment under there. Sometimes the parts need a good clean..old grease. The Rollei 'GO-NOGO' gauge slipped between the rollers is 0.011"-0.007" Probably a piece of backing paper/+ film would be close. Hope this helps. |