Glenn
Tinkerer Username: Glenn
Post Number: 283 Registered: 07-2006
Rating: N/A Votes: 0 | Posted on Monday, February 18, 2008 - 06:40 pm: | |
I do not know this camera; but your metal piece with the 45 degree bend looks like it should have a 90 degree bend, so that the downward pointing 'leg' can actually fit into the notch in the plate. If this is actually the cause of the problem, make sure that all the mechanism is free and properly cleaned and lubricated. Something must have caused the mechanism to jam and bend that lever out of true. |