Rate Post Log in | Log Out | Topics | Search
Moderators | Register | Edit Profile

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Don
Tinkerer
Username: Don

Post Number: 30
Registered: 07-2006

Rating: N/A
Votes: 0

Posted on Thursday, June 12, 2008 - 06:04 am:   

W/the back open, try pushing w/a small screwdriver thru the wind side slot where the tab on the top rim of the back cover engages the ctr mech. Hold the screwdriver in while you advance the shutter checking the ctr dial. If it works , check the tab on the top rim of the back cover to be sure its not bent. If not, best to leave it alone & count the # of frames as you go along. The mech is difficult to work on w/o repair notes & parts can go flying into outer space.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration