Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Rick_oleson Tinkerer Username: Rick_oleson Post Number: 611 Registered: 07-2006 Rating: N/A Votes: 0 Posted on Friday, June 27, 2008 - 07:45 pm:    Hi Ty: The little knob on the cocking lever unscrews. It has a LEFT HAND thread, which means that you have to turn it CLOCKWISE to loosen it... at least this was the case on the one that I serviced. Proceed very gently unscrewing the knob until you're sure you're going the correct direction, to avoid stripping the threads. Once you have the knob off, the lever should slip through the slot.