Rick_oleson
Tinkerer Username: Rick_oleson
Post Number: 701 Registered: 07-2006
Rating: N/A Votes: 0 | Posted on Wednesday, October 15, 2008 - 07:10 pm: | |
I'm not sure about the QL19GIII; in the QL17GIII, you reach these screws by peeling back the leatherette at the sides of the lens and removing a pair of access panels on the front, there is no other disassembly required. The screws are at the 4 corners of a rectangular plate, you can tighten them and put the access panels back in place. There are notes on the camera generally here http://rick_oleson.tripod.com/index-30.html and you can see one of these screws in the photo that shows the access panels removed. If the QL19GIII is not constructed differently, I apologize for misleading you - it's the closest thing that I have in my notes. |