Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Jayd Tinkerer Username: Jayd Post Number: 64 Registered: 06-2007 Rating: N/A Votes: 0 Posted on Sunday, May 31, 2009 - 10:42 am:    I think your right but I don't know what so I have taken what I hope is a more informative picture. The bulb and flash do not work I see the flash contact post but nothing that contacts it. The shutter speeds seems about right according to my best TV monitor check something I have trouble with on leafcutters. The pressure plate is not what I think it should be with two rivet heads in the middle of the film plane holding the single leaf 6 to 7mm leaf spring to the pressure plate as shown, and only a two attachment points holding it to the film door. Makes it rather wobbly and imprecise. If the drag on the film supply spool a spring steel tab 20mmx 20mm not show keeps enough tension on the film I guess the pressure plate need not do anything, but this could be a problem with 220 films? Thanks for all the help Jay