Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Casual_collector Tinkerer Username: Casual_collector Post Number: 13 Registered: 04-2009 Rating: N/A Votes: 0 Posted on Thursday, July 02, 2009 - 05:43 pm:    I just disassembled a noisy Yashica FX Winder. I used a tiny drop of light oil at each shaft bushing and friction points at shaft ends. This quieted the unit noticeably. The gears were clean and dry so I left them that way. This unit is in the original box and looks little, if at all used. What's your experience with similar winders? Should I apply a bit of grease to the teeth?