Rate Post Log in | Log Out | Topics | Search
Moderators | Register | Edit Profile

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Aford
Tinkerer
Username: Aford

Post Number: 63
Registered: 03-2007

Rating: N/A
Votes: 0

Posted on Sunday, July 12, 2009 - 12:58 pm:   

It is possible to move the focus ring to show feet instead of meters but its a bit tricky as the focus may go out of adjustment so be warned.

First prise out the outer trim ring, there is a small cut out where you can insert a small screwdriver. This will expose 3 screws, with these removed you can lift off the focus ring and change its position. Take care not to move the lens.

Before starting, you should mark the position of the lens at infinity just incase it moves. Also take a photo of it.

Good luck - Alf

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration