John_s
Tinkerer Username: John_s
Post Number: 4 Registered: 07-2009
Rating: N/A Votes: 0 | Posted on Saturday, August 01, 2009 - 11:33 am: | |
I seem to remember there are four screws which retain the taking lens / shutter assembly from the rear inside the body. I found that if these were loosened, there was enough play to disengage / re-engage the gears and adjust the focussing - this seems to be a design feature. I did not have to do any more than this on mine, I guess if you remove the screws completely, the taking lens will come off. Hope this helps. |