Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Teraforce88 Tinkerer Username: Teraforce88 Post Number: 10 Registered: 08-2009 Rating: N/A Votes: 0 Posted on Sunday, March 28, 2010 - 12:52 am:    UPDATE: Well, I just took apart my XE-7 again, and noticed that one of the solder joints on the Rp resistor (the little resistor towards the back of the pentaprism) didn't look so good. So I re-soldered it, and the meter pointer flew to the top! After some re-calibration against a known good camera (my X-700; no fancy calibration tools here!), the meter is pretty close to being good as new! The only thing now is the fact that when set to "Auto", the camera fires roughly 3/4 stop faster than what's indicated by the meter needle. Any suggestions? Thanks, Teraforce88