| Author | Message | ||
     Harkon Tinkerer Username: Harkon Post Number: 2 Registered: 11-2009 Rating: N/A |
Hey Ismaelg, thanks for your help, but I am still puzzled. I did not know that the serial-number-ring and the focus ring are two different parts, I thought they were one and I had never removed the serial-number-ring. Nonetheless I tried to do what you described. I was not able to remove the serial number ring, but I was able to partly lift off the rubber grip (see image 1). I did not lift it off further, because it is glued. But I still see no solution to my problem. I think that what I need to know is how I can attach the focus ring to the threaded aluminum ring. What is puzzeling me is the fact that the aluminium ring has no thread on the outside, the focus-ring has no thread on the inside, and that I can see no holes for the screws. I hope that I can make myself intelligible and that you can bring light into the dark :-) Harkon   |