Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Dmcrite33 Tinkerer Username: Dmcrite33 Post Number: 20 Registered: 03-2009 Rating: N/A Votes: 0 Posted on Sunday, November 22, 2009 - 04:01 am:    First, the shutter blades may be sticking, so put a couple of drops of naptha on them and make sure it gets in between the blades then cock and release the shutter a few times. To get into the shutter, open the back of the camera. There are 3 screws about 1" long holding the entire assembly, 2 on the left and 1 on the right. The screw heads may have little black round covers on them. Remove the screws and the shutter assembly comes out the front.