Lgdavis
Tinkerer Username: Lgdavis
Post Number: 25 Registered: 08-2007
Rating: N/A Votes: 0 | Posted on Saturday, December 05, 2009 - 07:30 am: | |
Rick, Thanks (again) for your good advice. I looked at the gear train carefully with a 10x loupe and also tried the screw you suggest. It's tight. But in looking at all of the gear train I found a piece of metal (about 1mm x 3mm)between two gears at the bottom. Removing that freed up the system!! The camera seems to work fine now. The piece of metal apparently came from a missing clip on the underside of the motor drive interface cover. My challange now is to find the other missing clip, so this doesn't happen again. When I bought the camera the MD cover was taped in place. Thanks, Larry |