Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Prasanna Tinkerer Username: Prasanna Post Number: 47 Registered: 10-2009 Rating: N/A Votes: 0 Posted on Friday, March 19, 2010 - 08:11 am:    Hi! I am planning to calibrate the meter in my Praktica LLC. I have done this successfully in the MTL3, MTL5B and TL5B models. In the LLC the PCB and the resistance pots are located elsewhere [somewhere inside and not at the bottom]. So before I open I would appreciate some guidance from anyone with some experience on the LLC, PLC2,series. Thank you, regards, sp.