![Top of page](https://kyp.hauslendale.com/classics/forum/icons/mark_top.gif) ![Previous message](https://kyp.hauslendale.com/classics/forum/icons/mark_up.gif) ![Next message](https://kyp.hauslendale.com/classics/forum/icons/mark_down.gif) ![Link to this message](https://kyp.hauslendale.com/classics/forum/icons/tree_m.gif)
Paul_c
Tinkerer Username: Paul_c
Post Number: 7 Registered: 02-2010
Rating: N/A Votes: 0 | Posted on Tuesday, March 23, 2010 - 05:33 am: | |
Thanks David ! I did see that ring deep down with 4 slots and gave it a try but was afraid to destroy something. I first used a aluminium tube and a file too make de tube fit the slots but aluminium is too soft so that did not work. Finely I used 2 screwdrivers kept in place with 2 plates and a spanner.I had too use excessive force too free the retaining ring. Initially there was no need too remove the lens but I build a LRT (lens removal tool) using a syringe with the top off and a piece mastic (Bostik) Next is too free the shutterblades(stuck open) and the diaphragm with one blade moving around arbitrary, David, thank You again
![lens removal tool](https://kyp.hauslendale.com/classics/forum/messages/2/18337.jpg) |