Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Xyvy Tinkerer Username: Xyvy Post Number: 1 Registered: 08-2010 Rating: N/A Votes: 0 Posted on Sunday, August 15, 2010 - 01:44 am:    Hello guys, I have dissassembled and cleaned (remove oil from blades) from Super-Takumar 50mm 1.4 succesfully, but now I am trying to clean fungus from Super-Multi-Coated Takumar 50mm 1.4 I see that the rear group in this SMC is different to how to remove in Super-Takumar. I put a few photos for if any of you could help me.. Unscrewing this ring I can remove the rear and middle lens from rear group. http://www.josevelasco.org/smc/pSMC50_14_rear1.jpg The next one shows I say: http://www.josevelasco.org/smc/pSMC50_14_rear2.jpg The problem is: how to remove the front lens from rear group? http://www.josevelasco.org/smc/pSMC50_14_rear3.jpg For the other side I see three little screws, but I am afraid to remove this to avoid broke the diaphragm. http://www.josevelasco.org/smc/pSMC50_14_rear4.jpg By the front I see a metal ring and at the back the glass that I need to remove, but this metal ring has not any notches that permit remove it. http://www.josevelasco.org/smc/pSMC50_14_rear5.jpg Any suggestion? Thank you very much!