David Nebenzahl
Rating: N/A Votes: 0 | Posted on Sunday, February 01, 2004 - 09:03 pm: | |
The only special tool you're going to need to get both top and bottom off is a small spanner wrench for the screw on top of the wind lever--you know, the one with two little holes in it. The spanner (pointy variety) sticks into these little holes and turns the screw. But even this can be improvised: two sharpened points held with pliers or something else will do, but you want to be careful so you don't end up with a bunch of nasty scratches. If you want to get such a spanner, fairly cheaply, plus any other camera-type tools, Micro-Tools has them. Apart from that, all you need is a set of small ("precision" or "jewelers") screwdrivers, including both flat and cross-point (Phillips) types. |