Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Waynemel Tinkerer Username: Waynemel Post Number: 53 Registered: 08-2009 Rating: N/A Votes: 0 Posted on Thursday, April 28, 2011 - 11:40 am:    I already have the front of the assembly off, and can't see any way to get further into the shutter. That's why I asked. Is it possible to remove the lens and shutter assembly without removing the entire front board assembly? (I've already done that with this camera, to replace the corroded wire from the battery chamber.) I was hoping I could get to the back side of Y13-5300 without completely disassembling in camera.