Rate Post Log in | Log Out | Topics | Search
Moderators | Register | Edit Profile

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Basselope1
Tinkerer
Username: Basselope1

Post Number: 8
Registered: 05-2011

Rating: N/A
Votes: 0

Posted on Friday, June 17, 2011 - 07:01 am:   

I picked up a beautiful Canon EX Auto from Ebay. But I could not get the battery compartment open. I have had some that were difficult but never like this. I used a nickel, then a new dollar coin, then a dollar coin clamped in vise grips. Nothing. Finally I dislocated the battery comaprtment from the base I was pushing down so hard. I took the base off and removed the compartment, clamped it in a rubber lined wedge and vise gripped the lid. Still nothing. WD-40 - nothing. Finally vise grips on one and vise grips on the other. Nothing. After an hour I had managed to scar up the lid and compartment enough that I am now looking for a Canon EX base to replace this one...but the lid is still holding fast. :-) Any suggestions for this kind of trouble in the future? I am assuming the inside must be totally corroded over. Thank you!

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration