| Author | Message | ||
     Brianentz Tinkerer Username: Brianentz Post Number: 3 Registered: 09-2011 Rating: N/A |
I removed the top to gain access and the needle does appear to move freely. However, gently pushing it up it doesn't want to go all the way up. Gently pushing it down it goes all the way down. I don't know if that's normal or not. It seems to want to settle back around 5.6. I blew the area out with my blower. Toward the left of the needle the far end of the needle moves within a semicircle notched area but again it will only go so far down (only allowing the needle to go so far up) without some undue pressure. It seems clear it has been worked on before. |