Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Mike_c Tinkerer Username: Mike_c Post Number: 8 Registered: 11-2008 Rating: N/A Votes: 0 Posted on Wednesday, March 14, 2012 - 10:49 am:    I've read that adjusting the rangefinder on a Vitessa requires you to replace the top plate after each adjustment to check the position of the patch. I left the top off and used a jeweller's loupe to look through the eyepiece: I was able to make out the patch and saved a lot of time & fiddling about.