Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Mikevernon Tinkerer Username: Mikevernon Post Number: 15 Registered: 02-2012 Rating: N/A Votes: 0 Posted on Sunday, June 03, 2012 - 07:49 am:    My 3.5E has one screw missing - one of the ones holding the strap brackets to the sides of the camera body, The screw is 7mm long and approximately 1.6mm in diameter with a pitch of around 0.4mm to 0.5mm, all measured by eye with a ruler. Can anybody tell me what thread these screws are, and better still, where to get hold of one? I'm assuming that they will be metric but I'm not sure.