Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Mike_c Tinkerer Username: Mike_c Post Number: 8 Registered: 11-2008 Rating: N/A Votes: 0 Posted on Tuesday, February 05, 2013 - 03:49 am:    I have a problem with the meter on my Lynx 14e. When it works, it’s spot on: but then suddenly, and for no apparent reason, it starts showing UNDER however I set the shutter speed and aperture (and film speed). Then it starts functioning perfectly again. Should I try cleaning the sliders—or is there some other more likely cause? Thanks for any advice. Mike