Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Hollenbj Tinkerer Username: Hollenbj Post Number: 96 Registered: 03-2012 Rating: N/A Votes: 0 Posted on Monday, February 18, 2013 - 04:08 pm:    I would not even try to use those notches to remove the piece. I did give them a light try, but very undersized if they are to remove the entire piece. The brass is quite soft. I would LOVE to see a photo of the rangefinder assembly with the piece removed so I can see if there are threads, or just friction fit. Has anybody removed this piece from a Zorki 6 or a Zorki 5 (same design)?