charlie
Rating: N/A Votes: 0 | Posted on Sunday, August 29, 2004 - 09:03 am: | |
From memory, open the back cover and flip up the rewind crank. Put one screwdriver in the slot in the shaft inside the camera to prevent it from turning while unscrewing the small slotted screw under the crank. Remove the two small Phillips head screws under the rewind knob and the similar small screw on the right hand end of the cover. The cover should now slide off. The shutter release button is loose and may fall off. Do all this over a white terrycloth towel to make small parts easier to see and to prevent them from bouncing or rolling away. Reassemble in reverse order. |