| Author | Message | ||
     Ioana Rating: N/A |
Hello Adam, I am not an expert, and just for surviving a while (mine left me then in an important time) I did the following thing that worked: After you take down the lense there are normally three little screws holding the first "whateverbiggermetalthing". I loosened them up a little bit - testing around. At a certain point the pressure put on that spring through the screws reliefs it, that the spring gets strong enough to drag that. Of course you have to test out not to release them too mutch, otherwise the lense is not fixed on the camera. Good luck otherwise. Ioana |