Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Winfried Rating: N/A Votes: 0 Posted on Monday, August 30, 2004 - 08:24 am:    You should check the connections to and the setting of the variable resistor next to the lightmeter assembly which can be accessed after removing the top cover. However, this is not the first Auto-S2 I see with a broken CdS resistor - maybe this is the culprit. It is not easy to check whether it responds to light correctly, only way to check is to swap it against a working one.