Kirill Sapelkin
Rating: N/A Votes: 0 | Posted on Sunday, January 23, 2005 - 06:06 pm: | |
It came off! After soaking for a while in corrosion solvent, I put a support (a flat plane iron in a vise) under the rewind fork (between the blades), had another person hold the camera so that any blows would be taken on the support and not on the camera body, and tapped on the screw/bushing with a drift and hammer. As the rewind shaft was supported, I was able to tap with vigor. 5 or 6 taps and it came off with no force. Now on to the circuit troubleshooting.... |