Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Glenn Middleton Rating: N/A Votes: 0 Posted on Saturday, February 12, 2005 - 07:17 pm:    Hello, The adhesive that holds the lens in the eyepiece has failed.The actual lens is approx 6mm thick,you need a hammer to break it!To repair you must remove the camera top and then the finder frame.The lens can then be epoxied back.Problem is you need a pin wrench to remove winder retainer and 00 and 000 +head screwdrivers.If you wish,I can tell you how to make pin wrench and adviseif you contact me, Glenn