| Author | Message | ||
     WernerJB Rating: N/A |
Hi John, same camera, different name: I once did RF alignment on a Voigtländer VF 135. It was necessary to take the VF array out for vertical alignment (from underneath) which in any case is usually done before horizontal adjustment. As far as I recall the matter one has to take off the top cap; be careful: the rewind knob has to be unscrewed by means of the screw underneath the lever. Another difference to similar cameras is that thr VF has parallax compensation, so two springs have to be unhooked. Then one can open the RF, I remember the screw in the middle is for (horizontal) alignment, the simple one on the right holds the RF array in place. I remember my method was trial and error and in comparison to other far more complex cameras it was a bit tricky to get the whole thing to working properly. |