    
Jan Dvorak
Rating: N/A
Votes: 0 | | Posted on Thursday, February 03, 2005 - 03:51 pm: | |
Dariush,
Check inside the battery compartment - one of the contacts (the one towards the back of the camera) has a tendency to be pushed in. If that happens, you will have no contact from one of the battery terminals.
This terminal sort of pokes through a hole in the battery compartment housing and should stick out just far enough to make contact with the battery. If it is pushed in, you will have to remove the base plate, remove the battery compartment and see why the contact became loose.
There might be other reasons for the meter not working, I would check this first.
Good luck,
Jan |