Ken H
Rating: N/A Votes: 0 | Posted on Saturday, February 05, 2005 - 05:47 pm: | |
Hello Smiffy The mirror is glued horizontally to the post. First remove carefully any glue from the back of the mirror and also clean the post where it mounts. You will notice there is a beveled edge on the mirror, this goes on the bottom when you glue it to the post. After it dries, then the vertical & horizontal alignment will need to be adjusted. The vertical adjustment is a screw that is located right behind the mirror and the horizontal adjustment is thru a small hole just below the back viewfinder glass. Ken H |