| Author | Message | ||
     Winfried Rating: N/A |
I am afraid that your readings when measuring the resistors are of little use - it is impossible to measure a resistor correctly when it is still connected to other parts, especially to transistors etc. The schematics provided by Roger only show the whole resistor bank but no values for each resistor. So the only way is to check the color codes. You also could try to lift the pc board with the resistors and resolder the solder points and/or check the tracks for continuity. Beware, in some odd cases the pressure of the measuring tip can make a broken solder point work again - but only until you remove the tip. |