Rate Post Log in | Log Out | Topics | Search
Moderators | Register | Edit Profile

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Dan Mitchell

Rating: N/A
Votes: 0

Posted on Sunday, March 20, 2005 - 10:57 pm:   

The FE2 does not give any meter readings until you wind to frame 1. So, make sure the film counter is at or past the 1 mark.

Make sure you have a fresh battery and the battery contacts are clean. Try different ASA settings and see if there is a difference. A common problem on the FE2 is dirty electrical contacts. There are several of them under the top cover. Any camera repair shop can do a cleaning of those without much trouble. Its not a good first camera repair project, so I wouldn't suggest doing it yourself unless you have some experience.

The FE2 is definitely worth getting fixed. I use mine all the time and like it very much.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration