| Author | Message | ||
     Santiago Arraga Rating: N/A |
Ed, many thanks for your reply. You were right; the arm was not retained by the mirror catch lever[1]. Moving the mirror tensioning lever so it is retained allows me to fire the shutter. Once. Now, I have two problems: a) The closing curtain keeps open with the mirror locked up. I can turn manually easily the winding-roller pinion that turns the mirror return gear. When i do it, I see the closing curtain creeping to its resting position. After I end turning it, the mirror return gear trips the mirror catch level, and the mirror goes down. The problem seems that the closing curtain does not go to its rest position. b) After I manually turn the winding-roller pinion, simulating the rear curtain closing, and letting the mirror drop, i have the camera essentially as if I had just fired the shutter normally. When I am cocking the shutter, the mirror-cocking level starts to push the mirror-tensioning lever to the front of the camera, but it does not push it forward enough in order for the mirror-catch lever to catch it, so it goes down again, without being catched, and not letting the shutter fire. I can push it to the front manually and catch it with the catching lever per your suggestion, and the shutter will fire. I'll keep digging in the camera repair manual, but as this is the first camera i'm trying to repair, i'd appreciate very much further insights in this problem. Again, many thanks for your help, Santiago in Uruguay [1] I got hold of an old national camera repair manual for the K1000, i'll use its terminology to refer to the pieces, while i'm digesting it. |