| Author | Message | ||
     Winfried Rating: N/A |
On most TLRs I have worked on (I hope Audrius enjoys his item) the front standard is attached to the focussing bars by four screws close to the corners. But I have never seen shims between the standard and the T shaped ends of the focussing sliders. I rather think the front end of the focussing sliders is misbent due to a severe shock. Probably rebending them is not possible without disassembly of the focussing mechanism which is not easy - on most TLRs on the crank side the focussing mechanism is hidden below the advance mechanism which sometimes can be removed as a separate subassembly. |