Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Glenn Middleton Rating: N/A Votes: 0 Posted on Tuesday, November 15, 2005 - 09:14 am:    Look down the hole and I think you will see a 'retaining clip'.You have to push this to one side with a small screwdriver whilst you push the rewind shaft in from the other end. A simple way is to file a small bevel on the end of the shaft - this lets the shaft push the 'clip' open. Imagine you are pushing a pencil point into the hole and I think you will see what is required.