Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Glenn Tinkerer Username: Glenn Post Number: 144 Registered: 07-2006 Rating: N/A Votes: 0 Posted on Friday, April 06, 2007 - 07:59 pm:    The simplest way is to get a sync cord, strip the insulation back and solder on a small micro switch. Another solution is to find/buy an extension shutter release switch/lead of the type that has a small jack-plug on the end. If you then solder a similar jack-socket to your sync cord, you can connect the two up. This method is useful if you have strobes with different sync cord plugs on them, you can make up a number of leads and use the same button/switch.