Mkitt
Tinkerer Username: Mkitt
Post Number: 1 Registered: 01-2007
Rating: N/A Votes: 0 | Posted on Thursday, August 30, 2007 - 11:44 am: | |
I had the same issue with the "door" seals on an OM10. The "opening" end of the top seal kept pulling away when the door was opened. Turned out that it simply wasn't pushed far enough into the slot. Once I had very carefully ensured that it was firmly seated it was fine. I used Jon Goodman's seals and tool which are excellent (so long as you take a bit more care than I initially did!) |