| Author | Message | ||
     Charlie Tinkerer Username: Charlie Post Number: 237 Registered: 07-2006 Rating: N/A |
I had a very good experience using the conductive epoxy sold for rear window defroster repair kits. I ran a test using a 100 ohm resistor measuring resistance without and with a piece of copper wire butt epoxied on and could see no difference. I then used it to attach a wire from the battery cavity of an Oly GSN to its meter and over a couple of years and several rolls of transparency film the exposures were fine. The epoxy repair also worked fine on my rear window defroster for the several more years I kept that car. Both sold now. |