Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Brcamera Tinkerer Username: Brcamera Post Number: 91 Registered: 08-2010 Rating: N/A Votes: 0 Posted on Wednesday, June 01, 2011 - 11:11 pm:    Yes, there is a pin that goes through the EV gear shaft and that will need to be removed. One end of the pin is pointed so drift out the pin from the opposite end. Once the gear is removed, the shutter mechanism plate can be removed from the front as with a standard Compur shutter for access to the blades.