| Author | Message | ||
     Jeffk Tinkerer Username: Jeffk Post Number: 7 Registered: 10-2011 Rating: N/A |
Also, note that the lens surfaces need to be scrupulously clean before you attempt rebonding. I used to use reagent-grade acetone for this sort of work, assembling interferometer components for product prototypes. You would also need to take some care in recentering the lenses - a cheap HeNe laser is useful here, you can look at the various backreflected ring patterns (projected back on a piece of paper around the laser, or on a wall) and adjust until they are coaxial. |