| Author | Message | ||
     Old_school Tinkerer Username: Old_school Post Number: 124 Registered: 04-2011 Rating: N/A |
Betlog: The image posted looks more like a cement separation, not an oil slick or migration. The pattern looks more characteristic of like a heat generated element separation or glue failure. Check on line for some sites on telescope servicing procedures. You might find a hobbyest that wil give some assistance on composition & structural configurations. I am sure you will have to remove the entire front element with the center lens (mirror) attached. This would give you the view you are looking for, but what you do after that is a good question. I would guess at this point you have nothing to loose & look into it. Good Luck! Give some feed back as to what you come up with on this as I am curious. The Best Mike.... |