Aford
Tinkerer Username: Aford
Post Number: 91 Registered: 03-2007
Rating: N/A Votes: 0 | Posted on Monday, December 12, 2011 - 04:35 pm: | |
Exa-500 Advance lever removal - under the leather circle you will find a screw with one hole in it, this requires a special tool to unscrew it but if you drill another hole opposite it then it can be unscrewed using needle nosed pliers. Under the screw head there is sometimes adhesive (Loctite). Another special tool is used to remove the counter dial without damaging it. I made one using a 15mm brass olive that I used to clamp it. Make a cut in the olive with a hacksaw then use a long thin screw and nut to squeeze the olive around the dial. This problem was posted a year or more ago. |