Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Brcamera Tinkerer Username: Brcamera Post Number: 149 Registered: 08-2010 Rating: N/A Votes: 0 Posted on Thursday, February 02, 2012 - 05:31 pm:    Actually, the next step I would take is to check the battery box wiring, but it can be checked by removing the bottom cover and the red wire going to the Mg3 combination magnet is coming direct from the battery box so you can check for 6 volts at that point. Battery box wiring is not a typical problem with A series camera and it's a good thing since the battery box can not be removed without taking off the front plate/mirror box and that is not a trivial matter.