| Author | Message | ||
     Railcrew Tinkerer Username: Railcrew Post Number: 4 Registered: 03-2012 Rating: N/A |
Rods are good, still intermittent as to slow or normal, the POD is a perfect 2mm. I've seen a schematic as to where the shutter rod 'contacts' are, is there a way to clean them without totally tearing apart the camera? I even moved the ASA setting around to 1000 a second and pointed it right at my light, it had me stop down (red arrow) took a shot, it was good, it fired perfect 3-4 times, set it down, tried again, back to yellow arrow and shutter open 4-5 seconds with a little whine noise like a flash warming up? |