Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Michael_linn Tinkerer Username: Michael_linn Post Number: 59 Registered: 04-2011 Rating: N/A Votes: 0 Posted on Wednesday, March 21, 2012 - 03:11 pm:    Those caps should work well. Just remember that caps have polarity and it is easy to check your polarity by simply touching the cap leads to the solder points on the flex and see if that permits shutter release. I've never found it necessary to even remove the old cap to perform the test. If that works, heat up the soldering iron. Good Luck!